GM MDI to clear all engine codes and shut off the &quot

Tips on how to Fix the Verify Engine Light on a Toyota RAV4 1Open the fuse panel in your RAV4 by pulling down on the fuse panel cover within the driver's side footwell.2Locate the rectangular plug operating from the key wiring harness. It will be for the left with the main fuse panel. This really is the onboard diagnostic access port. Auto tools

3Plug the OBD scan tool in to the access port and turn on the tool. Then, turn the ignition on GM MDI, but do not crank the engine. The scan tool will begin to retrieve the diagnostic codes from the RAV4.4Select "stored codes" from the menu options on your scan tool. You'll then need to refer to your RAV4's service manual to translate the numeric engine codes stored on your scan tool.5Press "clear" to clear all engine codes and shut off the "examine engine" light on your RAV4 dash.

Tips on how to Fix the Verify Engine Light on a 1995 Lexus 1Open the hood of your Lexus and loosen the battery retaining nut on the cable clamp secured towards the unfavorable battery terminal applying a socket wrench.2Slide the negative battery cable clamp off the unfavorable battery terminal.3Wait 15 minutes and after that reconnect the terminal and secure it using a socket wrench. This may reset the examine engine light, mainly because as soon as the energy has been disconnected, the electronic control unit memory clears.

Related articles: