Ways to Reset an Airbag Light 1Put the important into the ignition and turn the switch towards the "on" position.2Watch for the airbag light to turn on. It'll remain illuminated for seven seconds after which shut itself off. Immediately after it shuts off, right away turn the switch off and wait three seconds.3Repeat Measures 1 and two two extra instances.4Start the engine.
The SRS light must come on for seven seconds, then shut off and remain off Auto tools. The airbag light has been reset. Tips on how to Reset an Anti-Lock Brake Light 1Disconnect the good cable from the vehicle battery, then hold down on the brake pedal to drain the car's electrical system. This will reset the car's central personal computer. Plug the good cable back to restore the power. Even when this does not completely reset the light, it ought to remain off for as much as 1 week.2Change the ABS sensor in the event the light comes back on.
Unscrew the housing for the sensor that is certainly mounted for the wheel hub and unplug the wire, then attach and mount a new sensor. You could have to reset the laptop again as described above.3Connect an OBD code reader to your car's on-board diagnostics program to ascertain any other causes of the brake light. Look for codes associated with the brakes that seem on the reader, indicating any parts on the brakes that require repair or replacement car diagnostic software.
Related articles:
没有评论:
发表评论