How you can Check a Ford Windstar DTC Trouble Code Obd2 scanner
1Connect the datalink cable on your scan tool to the diagnostic port underneath the dashboard on the driver’s side. The port has a black dust cover that you must remove by hand first.
2Turn on your scan tool and run a self-test on the Windstar per the scan tool’s instructions. You can buy a scan tool at most auto parts retailers or through your local tool vendor. Make sure to purchase a scan tool that works with Ford software.
3When the self-test returns the codes, they will display on the scan tool’s screen. Write these codes down for later reference.
4Finish the self-test per the instructions in your scan tool’s owner’s manual. Do not erase the codes at this time. Erasing the codes will not correct the problem and may make it harder to troubleshoot Auto diagnostic tools, depending on the nature of the malfunction.
5Unplug the datalink cable from the Windstar’s diagnostic port when the self-test is completed. Place the dust cover over the port to protect it from contamination.
Related articles:
没有评论:
发表评论