The way to Destroy an Electronic Vehicle Important Obd2 scanner
1Remove the lithium ion battery inside the electronic car or truck important by taking off the battery cover and prying up the battery.2Pull the two halves from the electronic car or truck essential apart by holding the front plate with one hand and pulling on the lip in the battery compartment using the other hand.
3If you cannot pull the two halves of the electronic vehicle essential apart Car Diagnostic Tools, insert a metal nail file into the groove around the edge to pry the two halves apart.
4Locate the rectangular controller chip on the electronic circuit board. Pull the chip out with a chip puller or maybe a pair of tweezers. Try snapping the chip in half or smashing it using a hammer.
5Use a flat nose screwdriver to pry the transmitter from the electronic key card's electronic circuit board. Break any solder points on the electronic circuit board using a flat nose screwdriver or metal nail file to make sure that the circuits is not going to work.
Related articles:
没有评论:
发表评论